Cart 0
Monolayer Graphene on Cu 60x40 mm

Graphenea

Monolayer Graphene on Cu (60 mm x 40 mm)

$192.00

Monolayer Graphene on Cu (60 mm x 40 mm)

This product consist on a single-layer graphene grown on copper foil substrate. 

The Monolayer Graphene on Cu is a high quality product with a great homogeneity. Thanks to its excellent properties is one of the best options for R&D Departments and Universities. 

Graphene Film

  • · Growth method: CVD synthesis
  • · Appearance (color): Transparent
  • · Transparency: > 97%
  • · Appearance (form): Film
  • · Coverage: > 95%
  • · Number of graphene layers: 1
  • · Thickness (theoretical): 0.345 nm
  • · FET Electron Mobility on Al2O3: 2000 cm2/Vs
  • · Hall Electron Mobility on SiO2/Si: 4000 cm2/V
  • · Sheet Resistance on SiO2/Si: 450±40 Ohms/sq (1cm x1cm)
  • · Grain size: Up to 10 μm

Substrate Cu Foil

  • · Thickness: 18 μm
  • · Pretreated for easier bottom layer removal: Monolayer graphene on the back side of Copper is partially removed, but not completely, so an additional treatment like RIE is needed before transfer to eliminate the bottom layer totally

Applications

Graphene research, Electronics, Aerospace industry, MEMS and NEMS, Microactuators, Conductive coatings

    Publications

    • “Ultrathin rechargeable all-solid-state batteries based on monolayer graphene”, J. Mater. Chem. A, 2013,1, 3177-3181 DOI:10.1039/C3TA01183F
    • “Fabrication and Electrochemical Characterization of Single and Multi-Layer Graphene Anodes for Lithium-Ion Batteries”, J. electrochem. Soc. 2012, vol. 159, issue 6, A752 – A761

    Downloads

    $192.00

    Frequently Asked Questions

    A: The backside of Copper is partially removed, but not completely, so an additional treatment like RIE is needed before transfer to eliminate the bottom layer totally

    A: We recommend to keep the samples in vacuum or inert atmosphere if you are not going to use them in a while, in order to avoid copper oxidation.

    A: The copper used for growing graphene is polycrystalline, mainly <110> orientation is present. To determine the copper orientation we have done XRD analysis.


    Questions and answers about this Product

    Do you have any question? Make it here


    More from this collection

    Subscribe to our newsletter