Cart 0
Easy Transfer: Monolayer Graphene on Polymer Film (1 cm x 1 cm)

Graphenea

Easy Transfer: Monolayer Graphene on Polymer Film (1 cm x 1 cm)

$80.00

Easy Transfer: Monolayer Graphene on Polymer Film (1 cm x 1 cm)

Graphenea offers “Easy Transfer”: the easiest way to transfer monolayer graphene onto your substrate. We applied our long experience in growing and transferring high quality graphene films to let you experiment with any novel substrate by using Graphenea’s Easy Transfer.

Graphene Film

  • · Growth method: CVD synthesis
  • · Appearance (color): Transparent
  • · Transparency: > 97%
  • · Appearance (form): Film
  • · Coverage: > 95%
  • · Number of graphene layers: 1
  • · Thickness (theoretical): 0.345 nm
  • · FET Electron Mobility on Al2O3: 2000 cm2/Vs
  • · FET Electron Mobility on SiO2/Si: 4000 cm2/Vs
  • · Sheet Resistance on SiO2/Si: 450±40 Ohms/sq (1cm x1cm)
  • · Grain size: Up to 10 μm

Why using "Easy Transfer"

  • ·Avoids metal etching
  • ·Avoids hazardous chemical handling
  • ·Manipulation of thin film done at Graphenea
  • ·Bottom layer removed

Applications

Graphene research, Flexible batteries, Electronics, Aerospace industry, MEMS and NEMS, Microactuators, Conductive coatings

Publications

“Ultrathin rechargeable all-solid-state batteries based on monolayer graphene”, J. Mater. Chem. A, 2013,1, 3177-3181 DOI:10.1039/C3TA01183F

“Fabrication and Electrochemical Characterization of Single and Multi-Layer Graphene Anodes for Lithium-Ion Batteries”, J. electrochem. Soc. 2012, vol. 159, issue 6, A752 – A761

“Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils”, Science 5 June 2009, Vol. 324 no. 5932, pp 1312-1314; doi: 10.1126/science.1171245

Downloads

$80.00

Frequently Asked Questions

A: The backside of Copper is partially removed, but not completely, so an additional treatment like RIE is needed before transfer to eliminate the bottom layer totally

A: We recommend to keep the samples in vacuum or inert atmosphere if you are not going to use them in a while, in order to avoid copper oxidation.

A: The copper used for growing graphene is polycrystalline, mainly <110> orientation is present. To determine the copper orientation we have done XRD analysis.


Questions and answers about this Product

Do you have any question? Make it here


More from this collection

Subscribe to our newsletter